Linux:Synchronet - Revision history

Nelgin: /* iptables */

2017-10-31T00:26:57Z

iptables

← Older revision		Revision as of 00:26, 31 October 2017
Line 141:		Line 141:
	iptables -A INPUT -s yy.yy.yy.yy/32 -p tcp -m state --state NEW -m tcp --dport 24 -j ACCEPT		iptables -A INPUT -s yy.yy.yy.yy/32 -p tcp -m state --state NEW -m tcp --dport 24 -j ACCEPT
	iptables -A INPUT -p tcp -m state --state NEW -m tcp -m multiport --dports 6667,10088,11100,1700,1800,2000,2100,2200,2300,2500,7000 -j ACCEPT		iptables -A INPUT -p tcp -m state --state NEW -m tcp -m multiport --dports 6667,10088,11100,1700,1800,2000,2100,2200,2300,2500,7000 -j ACCEPT
	iptables -A INPUT -p tcp -m state --state NEW -m tcp -m multiport --dports 7900,8000,11000,11900,44300,11100,24554,58700 -j ACCEPT		iptables -A INPUT -p tcp -m state --state NEW -m tcp -m multiport --dports 7900,8000,11000,11900,44300,11100,24554,58700, 51300 -j ACCEPT
	iptables -A INPUT -p udp -m state --state NEW -m udp -m multiport --dports 1700,1800,7900 -j ACCEPT		iptables -A INPUT -p udp -m state --state NEW -m udp -m multiport --dports 1700,1800,7900 -j ACCEPT
	iptables -A INPUT -p tcp -m state --state NEW,RELATED,ESTABLISHED -m tcp --dport 62000:64000 -j ACCEPT		iptables -A INPUT -p tcp -m state --state NEW,RELATED,ESTABLISHED -m tcp --dport 62000:64000 -j ACCEPT
Line 175:		Line 175:
	iptables -t nat -A PREROUTING -p tcp -m tcp --dport 119 -j DNAT --to-destination xx.xx.xx.xx:11900		iptables -t nat -A PREROUTING -p tcp -m tcp --dport 119 -j DNAT --to-destination xx.xx.xx.xx:11900
	iptables -t nat -A PREROUTING -p tcp -m tcp --dport 443 -j DNAT --to-destination xx.xx.xx.xx:44300		iptables -t nat -A PREROUTING -p tcp -m tcp --dport 443 -j DNAT --to-destination xx.xx.xx.xx:44300
			iptables -t nat -A PREROUTING -p tcp -m tcp --dport 513 -j DNAT --to-destination xx.xx.xx.xx:51300
	iptables -t nat -A PREROUTING -p tcp -m tcp --dport 587 -j DNAT --to-destination xx.xx.xx.xx:58700		iptables -t nat -A PREROUTING -p tcp -m tcp --dport 587 -j DNAT --to-destination xx.xx.xx.xx:58700
	iptables -t nat -A PREROUTING -p udp -m udp --dport 11 -j DNAT --to-destination xx.xx.xx.xx:11100		iptables -t nat -A PREROUTING -p udp -m udp --dport 11 -j DNAT --to-destination xx.xx.xx.xx:11100

Nelgin: /* iptables */

2017-10-31T00:24:43Z

iptables

← Older revision		Revision as of 00:24, 31 October 2017
Line 141:		Line 141:
	iptables -A INPUT -s yy.yy.yy.yy/32 -p tcp -m state --state NEW -m tcp --dport 24 -j ACCEPT		iptables -A INPUT -s yy.yy.yy.yy/32 -p tcp -m state --state NEW -m tcp --dport 24 -j ACCEPT
	iptables -A INPUT -p tcp -m state --state NEW -m tcp -m multiport --dports 6667,10088,11100,1700,1800,2000,2100,2200,2300,2500,7000 -j ACCEPT		iptables -A INPUT -p tcp -m state --state NEW -m tcp -m multiport --dports 6667,10088,11100,1700,1800,2000,2100,2200,2300,2500,7000 -j ACCEPT
	iptables -A INPUT -p tcp -m state --state NEW -m tcp -m multiport --dports 7900,8000,11000,11900,44300,11100,24554 -j ACCEPT		iptables -A INPUT -p tcp -m state --state NEW -m tcp -m multiport --dports 7900,8000,11000,11900,44300,11100,24554,58700 -j ACCEPT
	iptables -A INPUT -p udp -m state --state NEW -m udp -m multiport --dports 1700,1800,7900 -j ACCEPT		iptables -A INPUT -p udp -m state --state NEW -m udp -m multiport --dports 1700,1800,7900 -j ACCEPT
	iptables -A INPUT -p tcp -m state --state NEW,RELATED,ESTABLISHED -m tcp --dport 62000:64000 -j ACCEPT		iptables -A INPUT -p tcp -m state --state NEW,RELATED,ESTABLISHED -m tcp --dport 62000:64000 -j ACCEPT
Line 175:		Line 175:
	iptables -t nat -A PREROUTING -p tcp -m tcp --dport 119 -j DNAT --to-destination xx.xx.xx.xx:11900		iptables -t nat -A PREROUTING -p tcp -m tcp --dport 119 -j DNAT --to-destination xx.xx.xx.xx:11900
	iptables -t nat -A PREROUTING -p tcp -m tcp --dport 443 -j DNAT --to-destination xx.xx.xx.xx:44300		iptables -t nat -A PREROUTING -p tcp -m tcp --dport 443 -j DNAT --to-destination xx.xx.xx.xx:44300
			iptables -t nat -A PREROUTING -p tcp -m tcp --dport 587 -j DNAT --to-destination xx.xx.xx.xx:58700
	iptables -t nat -A PREROUTING -p udp -m udp --dport 11 -j DNAT --to-destination xx.xx.xx.xx:11100		iptables -t nat -A PREROUTING -p udp -m udp --dport 11 -j DNAT --to-destination xx.xx.xx.xx:11100
	iptables -t nat -A PREROUTING -p udp -m udp --dport 17 -j DNAT --to-destination xx.xx.xx.xx:1700		iptables -t nat -A PREROUTING -p udp -m udp --dport 17 -j DNAT --to-destination xx.xx.xx.xx:1700

Nelgin at 23:27, 30 October 2017

2017-10-30T23:27:59Z

← Older revision		Revision as of 23:27, 30 October 2017
Line 63:		Line 63:

	* Now we need to install a bunch of packages that we'll need to build the SBBS package, plus some other useful tools. Some may be pre-installed by your provider depending on how they build their image. You will be told about additional packages that will be installed if they are needed. Some may not be needed if you're not going to use zoo or arc compression, for example, but at least they will be there if you need them.		* Now we need to install a bunch of packages that we'll need to build the SBBS package, plus some other useful tools. Some may be pre-installed by your provider depending on how they build their image. You will be told about additional packages that will be installed if they are needed. Some may not be needed if you're not going to use zoo or arc compression, for example, but at least they will be there if you need them.
	apt-get install gcc g++ cpp dos2unix socat zoo arj arc libperl-dev zlibc zlib1g-dev libbz2-dev zip mawk autotools-dev automake autoconf xutils-dev cvs netcat netcat-traditional iptables-persistent libnspr4-dev libnspr4 libncurses5-dev libtinfo-dev bzip2-doc cpp-5 g++-5 gcc-5 gcc-5-base libasan2 libatomic1 libc-dev-bin libc6 libc6-dev libcc1-0 libcilkrts5 libgcc-5-dev libgomp1 libtool flex bison libbison-dev libfl-dev libisl15 libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev libstdc++6 libtsan0 libubsan0 linux-libc-dev manpages-dev netfilter-persistent zlib1g dpkg-dev fakeroot libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl libdpkg-perl libfakeroot pkg-config autoconf2.13 libfile-fcntllock-perl libopts25 ntp bind9-host dnsutils libbind9-140 libdns162 libisc160 libisccfg140 liblwres141 dosemu binkd gkermit		apt-get install gcc g++ cpp dos2unix socat zoo arj arc libperl-dev zlibc zlib1g-dev libbz2-dev zip mawk autotools-dev automake autoconf xutils-dev cvs netcat netcat-traditional iptables-persistent libnspr4-dev libnspr4 libncurses5-dev libtinfo-dev bzip2-doc cpp-5 g++-5 gcc-5 gcc-5-base libasan2 libatomic1 libc-dev-bin libc6 libc6-dev libcc1-0 libcilkrts5 libgcc-5-dev libgomp1 libtool flex bison libbison-dev libfl-dev libisl15 libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev libstdc++6 libtsan0 libubsan0 linux-libc-dev manpages-dev netfilter-persistent zlib1g dpkg-dev fakeroot libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl libdpkg-perl libfakeroot pkg-config autoconf2.13 libfile-fcntllock-perl libopts25 ntp bind9-host dnsutils libbind9-140 libdns162 libisc160 libisccfg140 liblwres141 dosemu binkd gkermit exuberant-ctags

Nelgin: /* Setting up the Linux environment */

2017-10-16T17:20:58Z

Setting up the Linux environment

← Older revision		Revision as of 17:20, 16 October 2017
Line 22:		Line 22:
	It seems Ubuntu doesn't come with a default locale. Since we're working with software written in English and most likely you can read English, we're go with US English for now by using en_US.UTF-8. If you know your own locale setting then feel free to choose that.		It seems Ubuntu doesn't come with a default locale. Since we're working with software written in English and most likely you can read English, we're go with US English for now by using en_US.UTF-8. If you know your own locale setting then feel free to choose that.

	~~locale~~-~~gen en_US.UTF-8~~		dpkg-reconfigure locales

	~~update~~-~~locale~~		Select the locale for your area and choose OK to generate the proper locale. You may need to logout and back in again. en_US.UTF-8 is what we'll use for US systems.


Line 63:		Line 63:

	* Now we need to install a bunch of packages that we'll need to build the SBBS package, plus some other useful tools. Some may be pre-installed by your provider depending on how they build their image. You will be told about additional packages that will be installed if they are needed. Some may not be needed if you're not going to use zoo or arc compression, for example, but at least they will be there if you need them.		* Now we need to install a bunch of packages that we'll need to build the SBBS package, plus some other useful tools. Some may be pre-installed by your provider depending on how they build their image. You will be told about additional packages that will be installed if they are needed. Some may not be needed if you're not going to use zoo or arc compression, for example, but at least they will be there if you need them.
	apt-get install gcc g++ cpp dos2unix socat zoo arj arc libperl-dev zlibc zlib1g-dev libbz2-dev zip mawk autotools-dev automake autoconf xutils-dev cvs netcat netcat-traditional iptables-persistent libnspr4-dev libnspr4 libncurses5-dev libtinfo-dev bzip2-doc cpp-5 g++-5 gcc-5 gcc-5-base libasan2 libatomic1 libc-dev-bin libc6 libc6-dev libcc1-0 libcilkrts5 libgcc-5-dev libgomp1 libtool flex bison libbison-dev libfl-dev libisl15 libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev libstdc++6 libtsan0 libubsan0 linux-libc-dev manpages-dev netfilter-persistent zlib1g dpkg-dev fakeroot libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl libdpkg-perl libfakeroot pkg-config autoconf2.13 libfile-fcntllock-perl libopts25 ntp bind9-host dnsutils libbind9-140 libdns162 libisc160 libisccfg140 liblwres141 dosemu binkd		apt-get install gcc g++ cpp dos2unix socat zoo arj arc libperl-dev zlibc zlib1g-dev libbz2-dev zip mawk autotools-dev automake autoconf xutils-dev cvs netcat netcat-traditional iptables-persistent libnspr4-dev libnspr4 libncurses5-dev libtinfo-dev bzip2-doc cpp-5 g++-5 gcc-5 gcc-5-base libasan2 libatomic1 libc-dev-bin libc6 libc6-dev libcc1-0 libcilkrts5 libgcc-5-dev libgomp1 libtool flex bison libbison-dev libfl-dev libisl15 libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev libstdc++6 libtsan0 libubsan0 linux-libc-dev manpages-dev netfilter-persistent zlib1g dpkg-dev fakeroot libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl libdpkg-perl libfakeroot pkg-config autoconf2.13 libfile-fcntllock-perl libopts25 ntp bind9-host dnsutils libbind9-140 libdns162 libisc160 libisccfg140 liblwres141 dosemu binkd gkermit

Nelgin: /* Setting up the Linux environment */

2017-10-14T08:35:51Z

Setting up the Linux environment

← Older revision		Revision as of 08:35, 14 October 2017
Line 63:		Line 63:

	* Now we need to install a bunch of packages that we'll need to build the SBBS package, plus some other useful tools. Some may be pre-installed by your provider depending on how they build their image. You will be told about additional packages that will be installed if they are needed. Some may not be needed if you're not going to use zoo or arc compression, for example, but at least they will be there if you need them.		* Now we need to install a bunch of packages that we'll need to build the SBBS package, plus some other useful tools. Some may be pre-installed by your provider depending on how they build their image. You will be told about additional packages that will be installed if they are needed. Some may not be needed if you're not going to use zoo or arc compression, for example, but at least they will be there if you need them.
	apt-get install gcc g++ cpp dos2unix socat zoo arj arc libperl-dev zlibc zlib1g-dev libbz2-dev zip mawk autotools-dev automake autoconf xutils-dev cvs netcat netcat-traditional iptables-persistent libnspr4-dev libnspr4 libncurses5-dev libtinfo-dev bzip2-doc cpp-5 g++-5 gcc-5 gcc-5-base libasan2 libatomic1 libc-dev-bin libc6 libc6-dev libcc1-0 libcilkrts5 libgcc-5-dev libgomp1 libtool flex bison libbison-dev libfl-dev libisl15 libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev libstdc++6 libtsan0 libubsan0 linux-libc-dev manpages-dev netfilter-persistent zlib1g dpkg-dev fakeroot libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl libdpkg-perl libfakeroot pkg-config autoconf2.13 libfile-fcntllock-perl libopts25 ntp bind9-host dnsutils libbind9-140 libdns162 libisc160 libisccfg140 liblwres141 binkd		apt-get install gcc g++ cpp dos2unix socat zoo arj arc libperl-dev zlibc zlib1g-dev libbz2-dev zip mawk autotools-dev automake autoconf xutils-dev cvs netcat netcat-traditional iptables-persistent libnspr4-dev libnspr4 libncurses5-dev libtinfo-dev bzip2-doc cpp-5 g++-5 gcc-5 gcc-5-base libasan2 libatomic1 libc-dev-bin libc6 libc6-dev libcc1-0 libcilkrts5 libgcc-5-dev libgomp1 libtool flex bison libbison-dev libfl-dev libisl15 libitm1 liblsan0 libltdl-dev libmpc3 libmpx0 libquadmath0 libstdc++-5-dev libstdc++6 libtsan0 libubsan0 linux-libc-dev manpages-dev netfilter-persistent zlib1g dpkg-dev fakeroot libalgorithm-diff-perl libalgorithm-diff-xs-perl libalgorithm-merge-perl libdpkg-perl libfakeroot pkg-config autoconf2.13 libfile-fcntllock-perl libopts25 ntp bind9-host dnsutils libbind9-140 libdns162 libisc160 libisccfg140 liblwres141 dosemu binkd

Nelgin: /* iptables */

2017-10-14T07:06:28Z

iptables

← Older revision		Revision as of 07:06, 14 October 2017
Line 131:		Line 131:
	* Verify that sshd is now listening on port 24		* Verify that sshd is now listening on port 24

	netstat -anp\|grep ~~ssh~~		netstat -anp\|grep sshd

	You should see a LISTEN line with 0.0.0.0:24		You should see a LISTEN line with 0.0.0.0:24

Nelgin: /* iptables */

2017-10-14T07:06:18Z

iptables

← Older revision		Revision as of 07:06, 14 October 2017
Line 148:		Line 148:
	iptables -A INPUT -j REJECT --reject-with icmp-host-prohibited		iptables -A INPUT -j REJECT --reject-with icmp-host-prohibited

	** Line 1 flushes the table so there's nothing to interfere<br>		Line 1 flushes the table so there's nothing to interfere<br>
	** Line 2 allows established connections to continue without having to try and match the rule again. This is here for speed.<br>		Line 2 allows established connections to continue without having to try and match the rule again. This is here for speed.<br>
	** Line 3 Replace yy.yy.yy.yy with your IP address. This is your way into your box. You can add multiple lines if you have multiple places you may wish to login from. If your IP address is rather dynamic then you'll want to probably leave out the -s yy.yy.yy.yy otherwise you'll be locked out of your box.<br>		Line 3 Replace yy.yy.yy.yy with your IP address. This is your way into your box. You can add multiple lines if you have multiple places you may wish to login from. If your IP address is rather dynamic then you'll want to probably leave out the -s yy.yy.yy.yy otherwise you'll be locked out of your box.<br>
	** line 4-5 these are the TCP ports we're going to accept. They're the base port with 00 added on for those under 1024 except for 11100. For example port 2300 will be used for telnet access and will be redirected there from port 23. Not all these ports may be used so if you don't plan on using the ircd you can leave off 6667. You can specify upto 15 ips per line.<br>		line 4-5 these are the TCP ports we're going to accept. They're the base port with 00 added on for those under 1024 except for 11100. For example port 2300 will be used for telnet access and will be redirected there from port 23. Not all these ports may be used so if you don't plan on using the ircd you can leave off 6667. You can specify upto 15 ips per line.<br>
	** Line 6 same as above but for UDP services.<br>		Line 6 same as above but for UDP services.<br>
	** Line 7 are TCP ports used for passive ftp. If you're not going to use ftp then you can leave out ports 2000, 2100, and line 6.<br>		Line 7 are TCP ports used for passive ftp. If you're not going to use ftp then you can leave out ports 2000, 2100, and line 6.<br>
	** Line 8 allows you to accept ping requests from your local ip. If you don't want people to ping your box then include this line.<br>		Line 8 allows you to accept ping requests from your local ip. If you don't want people to ping your box then include this line.<br>
	** Line 9 Always accept connections on localhost.<br>		Line 9 Always accept connections on localhost.<br>
	** Line 10 Reject everything else.<br>		Line 10 Reject everything else.<br>

	* Now you need to create NAT rules to redirect from the lower ports		* Now you need to create NAT rules to redirect from the lower ports

Nelgin: /* iptables */

2017-10-14T06:59:05Z

iptables

← Older revision		Revision as of 06:59, 14 October 2017
Line 148:		Line 148:
	iptables -A INPUT -j REJECT --reject-with icmp-host-prohibited		iptables -A INPUT -j REJECT --reject-with icmp-host-prohibited

	Line 1 flushes the table so there's nothing to interfere<br>		** Line 1 flushes the table so there's nothing to interfere<br>
	Line 2 allows established connections to continue without having to try and match the rule again. This is here for speed.<br>		** Line 2 allows established connections to continue without having to try and match the rule again. This is here for speed.<br>
	Line 3 Replace yy.yy.yy.yy with your IP address. This is your way into your box. You can add multiple lines if you have multiple places you may wish to login from. If your IP address is rather dynamic then you'll want to probably leave out the -s yy.yy.yy.yy otherwise you'll be locked out of your box.<br>		** Line 3 Replace yy.yy.yy.yy with your IP address. This is your way into your box. You can add multiple lines if you have multiple places you may wish to login from. If your IP address is rather dynamic then you'll want to probably leave out the -s yy.yy.yy.yy otherwise you'll be locked out of your box.<br>
	line 4-5 these are the TCP ports we're going to accept. They're the base port with 00 added on for those under 1024 except for 11100. For example port 2300 will be used for telnet access and will be redirected there from port 23. Not all these ports may be used so if you don't plan on using the ircd you can leave off 6667. You can specify upto 15 ips per line.<br>		** line 4-5 these are the TCP ports we're going to accept. They're the base port with 00 added on for those under 1024 except for 11100. For example port 2300 will be used for telnet access and will be redirected there from port 23. Not all these ports may be used so if you don't plan on using the ircd you can leave off 6667. You can specify upto 15 ips per line.<br>
	Line 6 same as above but for UDP services.<br>		** Line 6 same as above but for UDP services.<br>
	Line 7 are TCP ports used for passive ftp. If you're not going to use ftp then you can leave out ports 2000, 2100, and line 6.<br>		** Line 7 are TCP ports used for passive ftp. If you're not going to use ftp then you can leave out ports 2000, 2100, and line 6.<br>
	Line 8 allows you to accept ping requests from your local ip. If you don't want people to ping your box then include this line.<br>		** Line 8 allows you to accept ping requests from your local ip. If you don't want people to ping your box then include this line.<br>
	Line 9 Always accept connections on localhost.<br>		** Line 9 Always accept connections on localhost.<br>
	Line 10 Reject everything else.<br>		** Line 10 Reject everything else.<br>

	* Now you need to create NAT rules to redirect from the lower ports		* Now you need to create NAT rules to redirect from the lower ports

Nelgin: /* iptables */

2017-10-14T06:58:08Z

iptables

← Older revision		Revision as of 06:58, 14 October 2017
Line 137:		Line 137:
	* You'll need to enter a number of iptables commands. I'll explain each one.		* You'll need to enter a number of iptables commands. I'll explain each one.

	~~Flush the~~ INPUT ~~chain to make sure nothing is interfering with us.~~		iptables -F INPUT
	iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT		iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
	iptables -A INPUT -s yy.yy.yy.yy/32 -p tcp -m state --state NEW -m tcp --dport 24 -j ACCEPT		iptables -A INPUT -s yy.yy.yy.yy/32 -p tcp -m state --state NEW -m tcp --dport 24 -j ACCEPT
Line 148:		Line 148:
	iptables -A INPUT -j REJECT --reject-with icmp-host-prohibited		iptables -A INPUT -j REJECT --reject-with icmp-host-prohibited

	Line 1 allows established connections to continue without having to try and match the rule again. This is here for speed.		Line 1 flushes the table so there's nothing to interfere<br>
	Line 2 Replace yy.yy.yy.yy with your IP address. This is your way into your box. You can add multiple lines if you have multiple places you may wish to login from. If your IP address is rather dynamic then you'll want to probably leave out the -s yy.yy.yy.yy otherwise you'll be locked out of your box.		Line 2 allows established connections to continue without having to try and match the rule again. This is here for speed.<br>
	line 3-4 these are the TCP ports we're going to accept. They're the base port with 00 added on for those under 1024 except for 11100. For example port 2300 will be used for telnet access and will be redirected there from port 23. Not all these ports may be used so if you don't plan on using the ircd you can leave off 6667. You can specify upto 15 ips per line.		Line 3 Replace yy.yy.yy.yy with your IP address. This is your way into your box. You can add multiple lines if you have multiple places you may wish to login from. If your IP address is rather dynamic then you'll want to probably leave out the -s yy.yy.yy.yy otherwise you'll be locked out of your box.<br>
	Line 5 same as above but for UDP services		line 4-5 these are the TCP ports we're going to accept. They're the base port with 00 added on for those under 1024 except for 11100. For example port 2300 will be used for telnet access and will be redirected there from port 23. Not all these ports may be used so if you don't plan on using the ircd you can leave off 6667. You can specify upto 15 ips per line.<br>
	Line 6 are TCP ports used for passive ftp. If you're not going to use ftp then you can leave out ports 2000, 2100, and line 6.		Line 6 same as above but for UDP services.<br>
	Line 7 allows you to accept ping requests from your local ip. If you don't want people to ping your box then include this line		Line 7 are TCP ports used for passive ftp. If you're not going to use ftp then you can leave out ports 2000, 2100, and line 6.<br>
	Line 8 Always accept connections on localhost		Line 8 allows you to accept ping requests from your local ip. If you don't want people to ping your box then include this line.<br>
	Line 9 Reject everything else		Line 9 Always accept connections on localhost.<br>
			Line 10 Reject everything else.<br>

	* Now you need to create NAT rules to redirect from the lower ports		* Now you need to create NAT rules to redirect from the lower ports

Nelgin: /* Setting up the Linux environment */

2017-10-14T06:46:46Z

Setting up the Linux environment

← Older revision		Revision as of 06:46, 14 October 2017
Line 86:		Line 86:
	* Add a user for your BBS to run under. Run the addsuer command and fill in any of the details you wish to and create a password.		* Add a user for your BBS to run under. Run the addsuer command and fill in any of the details you wish to and create a password.

	~~addsuer~~ bbs		adduser bbs